6. GENERAL FUNCTIONING OF THE CONTROL PANEL
It is used to scroll through the pages
Pressed in MOTOR STOP status it starts the motor
in manual mode
Pressed it starts the motor in automatic mode
Pressed the motor goes in STOP function
Pressed in case of an alarm it resets it
26
SETUP PREMI
PAGE + MAN 10s
ON
400 V 13.2A
Cf 0.80 0 h
THE FOLLOWING SCREEN DISPLAYS:
- MEASURED VOLTAGE
- ABSORBED CURRENT
- COS
φ
DETECTED
- OPERATING HOURS OF THE MOTOR
AUTOMATIC MOTOR
Cf 0.80 13.2 A
STOP MOTOR
Cf 1.00 0.0 A
400 V 13.2 A
Cf 0.80 0h
IGNITION
CONTROL PANEL
THIS SCREEN IS DISPLAYED ONLY IF THE MAINS
SUPPLY WAITING FUNCTION IS ENABLED
IN THE SETUP MENU. TO EXCLUDE THE
WAITING TIME PRESS
RESET
MAINS WAIT. 1 m
RESET TO START
IT IS USED TO START
THE MOTOR MANUALLY
IT DISPLAYS THE REMAINING
WAITING FILLING TIME
IF THE MOTHERBOARD
DETECTS A DRY RUNNING
CONDITION IT WILL BE
POSSIBLE TO DISPLAY
A FOURTH SCREEN
WAITING FILLING
START 1 h 10 m
CURRENT R 13.2A
S 13.2A T 13.2A
THE FOLLOWING SCREEN DISPLAYS:
- R PHASE CURRENT
- S PHASE CURRENT
- T PHASE CURRENT
N.B.:
ONLY THREE-PHASE VERSION
ONLY IN STABLE MANUAL
BUTTON MODE
EXTERNAL COMMAND
OFF
EXTERNAL COMMAND
ON
OFF: DISABLE MOTOR
ON: ENABLE MOTOR