19
Tel: 886.909 602 109 Email: [email protected]
4.
Software Operation
The software simultaneously controls the vector network analyzer and the electronic calibration kit, coordinates the two to
automatically complete the measurement of each standard, and corrects various system errors. Using the above solution, the same
electronic calibration kit can be used on mainstream vector network analyzers, which breaks through the limitations of instrument
manufacturers. Instruments of different manufacturers can use the same electronic calibration kit to complete the calibration. It greatly
reduces the cost of using electronic calibration technology, and significantly increases the scope of use of electronic calibration
components.
4.1.
User Interface
The soft UI has 2 windows:
Connection window is used to build the connections.
Measurement window is used to configure the calibration details.
Connection window
As shown in the figure below, the interface for connecting the software to the instrument, the functions of each part are as follows:
【
IP
】
Specify the IP address of the vector network analyzer when controlling the vector network analyzer via LAN.
【
Port Number
】
The port number of the vector network analyzer SOCKET server.
【
Address
】
Specify the GPIB address of the vector network analyzer.
【
Connect
】
Connect the specified vector network analyzer through the specified method (LAN or GPIB), and the Information function block will
display the connection result.
【
Add Support
】
When connected to a vector network analyzer, and this instrument is not supported by this software, and the product model is not
supported by the above
When the product model is selected, this button is activated. Select this button, and the add support module on the right will be
activated.
