Tel: 886.909 602 109 Email: [email protected]
14
Section 2 front panel
The appearance of the front panel of the S5105D/E/F microwave analyzer is shown in Figure 3-5:
1
Key description
Figure 3-5 Front panel of S5105D/E/F microwave analyzer
a)
Function key area
It is used to change the measurement parameter setting, including six keys:
Freq
Amplitude
Bandwidth
Mkr
Measure
Mode
1)
【
Freq
】
Figure 3-6 Parameter setting key
Set the center frequency, start/stop frequency, span and frequency step for
measurement in the antenna test mode, vector network analyzer mode,
spectrum analyzer mode and power monitoring mode.
Set the center frequency in the USB Power Meter mode and vector voltage
measurement mode.
2)
【
Amplitude
】
Set such parameters as the auto scale, reference level, reference position, scale and
output power in the antenna test mode and vector network analyzer mode.
Set the amplitude such parameters for displaying the measurement result as the
reference level, attenuator, scale display, unit and preamplifier control in the spectrum
analyzer mode.
