background image

Press the green Play/Pause 
button to immediately 
start the Timer.
The Enso Ring will 
immediately disappear and 
then gradually fill in as the 
current Interval counts down.
The on-screen pause icon will 
disappear and the play icon 
will become visible.

Note:

 the minute display is rounded 

up and thus will not decrement until 
after the first minute has elapsed.

Use the + button to 
increment the Interval 
1 to 45 min.  Holding 
down the + button will 
accelerate the rate at which 
time is added.
As shown by the display time 
is being added to Interval 1/1 
(Interval 1 of 1 total Intervals).

The Timer screen icon is visible 
when the clock is in Timer Set 
mode.
The current time is displayed 
in the small digits at the top 
of the display.
The large digits in the center 
of the display show the 
number of hours and minutes 
for the current interval.
The Interval display shows the number 
of the current Interval as well as the total 
number of Intervals in the timer.

TUTORIAL: Setting the Timer

Press the Timer Button

1

Check the Intervals

2

Make sure the display 
reads “Interval 1/1”.
If not, repeatedly 
hold down the << 
button to delete 
extra intervals.

TG-EC-100-1.1

Set the timer to countdown 45 minutes.
This is a 1-interval timer of 45 minutes.

Task:

Adjust the Duration of Interval 1.

3

number

r.

Start the Timer

4

d d

45

min

Interval

1

Summary of Contents for Enso Clock

















Reviews: