6
OPERATING INSTRUCTIONS
*There may be a brief manufacturing odour or small amount of smoke during first use. This
usually occurs when using cooking appliances for the first time as the element will take a
minute or two to cure, etc. Please ensure that there is sufficient ventilation in the area where
you are using the appliance*
1.
After following the instructions above, place the hotplate on a firm, flat surface.
2.
E
nsure that the control panel of the hotplate is set to the “0” or “OFF” position.
3.
Insert the power cord of the hotplate into a suitable plug socket.
4.
Place the wok (with lid in place) in the centre of the hotplate. Ensure that the wok is
placed securely.
5.
To switch the unit on, set the control panel to the required temperature LOW/ MED/ HI
by turning the knob in a clockwise direction. The indicator light will turn on and the unit
will start heating to the temperature required. As the wok heats up, you may hear a
clicking sound. This is due to the expansion of the metal as it heats and is normal. You
may also notice this sound as the unit cools down. The indicator light will turn off when
the unit has reached desired temperature. NOTE: Never turn the unit on without any
food and / or liquid in the wok.
6.
Before first use: pour some salad or vegetable oil into the wok together with some
water and bring it to the boil. Leave it to boil for 5-7 minutes. Once complete, discard
the oil and water mixture. Clean the wok as per the cleaning instructions in the manual
then begin the cooking process. This quick measure will eliminate any manufacturing
odours.
7.
To cook: Follow steps 1 to 5 above. Now lift the lid and place the food to be cooked
into the wok. Be careful when inserting the food as the wok is hot and this may cause
the food to splatter. Be careful not to overfill the wok. During cooking, the indicator light
may cycle on and off indicating that the desired temperature is being maintained. Tip:
Experiment with foods and experience a world of taste.
8.
Once the food is cooked to your preference, turn the temperature control to the
“0” or
“OFF” position and unplug the unit from the power socket.