7
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below:
This unit is designed to operate on 230V-240V current only. Connecting to other
power sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue
= Neutral
Brown
= Live
TROUBLE SHOOTING
1.
If the air-cooler does not work:
a.
Ensure that the unit is plugged in and is switched on.
b.
Check that the wire from the terminal block has not come loose
c.
Ensure that the motor is not damaged.
d.
If the unit is not working after changing the filter, ensure that the
motor wires have been reconnected and are not loose.
2.
If the air is not cool
:
a.
Ensure that there is water in the cooler.
b.
Make sure that the rotating filter pad is moving.
c.
Make sure the window or door is open and that the unit is
receiving sufficient ventilation
d.
Switch the cooler on in the morning before it gets too hot.
e.
If the room size is large, try to cool specific areas instead if the
whole room.
f.
Add ice to the large compartment.
