background image

In order to avoid damage to this appliance or injury to the user, the following list of basic safety 

measures should always be adhered to. If the user fails to comply with these measures the warranty 

will become invalid and the supplier cannot be held responsible. 

1. Read through the instruction manual and keep it for future reference.

2. Remove all packing material and carefully check your ice maker to ensure it is in good condition

and that there is no damage to the ice maker or power cord and plug.

3. The use of an extension cord with this appliance is not recommended. However, if it is necessary

to use an extension cord, ensure that the cord is suited to the power consumption of the appliance

to avoid overheating of the extension cord, appliance or plug point.

-Do not place the extension cord in a position where it can be pulled on by children or animals or

tripped over.

4. Do not locate multiple portable socket-outlets or portable power supplies at the rear of the

appliance.

5. If the power cord is damaged; it must be replaced by the manufacturer and its qualified service

agents.

6. Before using the ice maker for the first time, please wait 2 hours after positioning it, and keep the

lid open for at least 2 hours.

7. Pure water is not allowed to be used on this unit; spring water is recommended.

8. Always ensure that the voltage on the rating label corresponds to the mains voltage in your home.

9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a

qualified person to avoid any hazard.

10. Do not tilt your appliance more than 45° during transportation or relocation.

11. To protect against risk of electric shock, do not pour water on the cord, plug and air vents.

12. Do not immerse the appliance in water or any other liquid.

13. Unplug the appliance after using or before cleaning.

14. Keep the appliance 15cm away from other objects to ensure good ventilation.

15. The use of accessory attachments that are not recommended by the manufacturer may result in

injury, fire/electric shock or may damage the ice maker.

16. Your close supervision is required when the appliance is used by children or people with reduced

physical, sensory and mental capabilities.

17. Children should not play with the ice maker.

18. Your ice maker should be kept away from heat sources such as electric ovens, heaters, stoves

and should not be kept under direct sunlight.

19. Do not switch the power button between on and off positions within 5 minutes. This is important to

protect the compressor.

20. To avoid fire and short circuit, metal sheets or other electric objects are not allowed to be inserted

into the appliance.

21. 

Warning:

 Do not store explosive substances such as aerosol cans with a flammable propellant in

this appliance.

22. The refrigerant and insulation blowing gas are flammable when disposing the appliance, do so

only at an authorised waste disposal center.

23.

Warning;

 this symbol indicates the refrigerant R600a and the non-metallic materials of the

appliance are flammable. 

Do not expose to flames.

24. Do not damage the refrigerant circuit.

25. In case of technical problems, switch off the machine and do not attempt to repair it yourself.

Return the appliance to an authorised service facility for examination, adjustment or repair. Always

insist on the use of original spare parts.

Failure to comply with the above-mentioned pre-cautions and instructions, could affect the 

safe operation of this machine. 

4

Summary of Contents for SIMM12













Reviews: