•
Allow the unit to cool down completely and then pull out the power plug, remove
the connector before cleaning.
•
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
•
Always remember to unplug the unit from the electrical outlet when not in use
and before cleaning. Ensure that the control knob is set to “0”.
•
The control element must never be dipped in any liquid
•
Allow the unit to dry completely, before connecting it to the mains again.
•
Do not use sharp or abrasive cleaning material.
STORING THE APPLIANCE
•
Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
•
Store the appliance in its box or in a clean, dry place.
•
Never store the appliance while it is still wet or dirty.
•
Never wrap the power cord around the appliance.
CHANGING THE PLUG
Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on 230V current only. Connecting to other power
sources may damage the appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue
=
Neutral
Brown
= Live
5
