Salton SFP600 Instructions Manual Download Page 3

 

14. Do not let the cord hang over the edge of a table or counter. Ensure that the cord 

is not in a position where it can be pulled on inadvertently. 

15. Do not allow the cord to touch hot surfaces and do not place on or near a hot gas 

or electric burner or in a heated oven. 

16. Do not use the appliance on a gas or electric cooking top or over or near an open 

flame. 

17. Use of an extension cord with this appliance is not recommended. However, if it 

is necessary to use an extension lead, ensure that the lead is suited to the power 

consumption of the appliance to avoid overheating of the extension cord, 

appliance or plug point. Do not place the extension cord in a position where it can 

be pulled on by children or animals or tripped over. 

18. This appliance is not suitable for outdoor use. Do not use this appliance for 

anything other than its intended use. 

19. DO NOT carry the appliance by the power cord. 

20. Do not leave this appliance unattended during use. Always unplug the unit when 

not in use or before cleaning. 

21. Always operate the appliance on a smooth, even, stable surface. Do not place 

the unit on a hot surface. 

22. 

Ensure that the switch is in the “Off” position after each use. 

23. The manufacturer does not accept responsibility for any damage or injury caused 

by improper or incorrect use, or for repairs carried out by unauthorised 

personnel. 

24. In case of technical problems, switch off the machine and do not attempt to repair 

it yourself. Return the appliance to an authorised service facility for examination, 

adjustment or repair. Always insist on the use of original spare parts. Failure to 

comply with the above mentioned pre-cautions and instructions, could affect the 

safe operation of this machine. 

25. In case of technical problems, switch off the machine and do not attempt to repair 

it yourself. Return the appliance to an authorised service facility for examination, 

adjustment or repair. Always insist on the use of original spare parts. Failure to 

comply with the above mentioned pre-cautions and instructions, could affect the 

safe operation of this machine. 

26. Do not operate the unit for more than 1 (one) minute continuously. Use the unit 

for 1 (one) minutes, then let the unit rest for 8 (eight) minutes before operating 

again. After five cycles of use and rest, rest the unit for 30 (thirty) minutes. 

Summary of Contents for SFP600











Reviews: