manualshive.com logo in svg

Salton SFH 804, Instructions And Warranty, Page: 2 / 10

Share
Download
Salton SFH 804 Instructions And Warranty Download Page 2

 

2 

Congratulations on purchasing our Salton Versatile Fan Heater. Each unit is 

manufactured to ensure safety and reliability. Before using this appliance for the first 

time, please read the instruction manual carefully and keep it for future reference. 

 

IMPORTANT SAFEGUARDS 

When using any electrical appliance, basic safety precautions should always be followed 

including the following: 

1.  Please read the instructions carefully before using the fan heater. 

2.  Always ensure that the voltage on the rating label corresponds to the mains 

voltage in your home. 

3.  Incorrect operation and improper use can damage the fan heater and cause injury 

to the user. 

4.  The fan heater is intended for household use only. Commercial use invalids the 

warranty and the supplier cannot be held responsible for injury or damage caused 

when using the appliance for any other purpose than that intended. 

5.

 

Avoid any contact with moving parts.

 

6.  This fan heater is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety. 

7.  Children should be supervised to ensure that they do not play with the fan heater. 

8.  Check the power cord and plug regularly for any damage. If the cord or the plug is 

damaged, it must be replaced by the manufacturer or a qualified person in order to 

avoid an electrical hazard. 

9.  Do not use the fan heater if it has been dropped or damaged in any way. In case of 

damage, take the heater in for examination and/or repair by an authorised service 

agent 

10. To reduce the risk of electric shock, do not immerse or expose the motor 

assembly, plug or the power cord to water or any other liquid. 

11. Never immerse the fan heater in water or any other liquid for cleaning purposes. 

12. Remove the plug from the socket by gripping the plug. Do not pull on the cord to 

disconnect the fan heater from the mains. Always unplug the fan heater when not 

in use, before cleaning or when adding or removing parts. 

Summary of Contents for SFH 804











Reviews:

No comments