5
CLEANING AND MAINTENANCE
This heater is for household use only.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
Always remember to unplug the heater from the electrical outlet when not in use
and before cleaning. Ensure that the heat control is set to off and has cooled
down.
The body of the heater should be cleaned with a damp cloth. Do not let water
enter the heater.
Do not use bleach or other abrasive substance or solvents to clean your heater
as it can be damaging to the finish.
Do not immerse the heater in water or any other liquid, or hold it under a running
tap to clean.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly
dampened in soapy water or mild non-abrasive cleaner.
STORING THE HEATER
Unplug the heater from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.
Store the heater in its box or in a clean, dry place.
Never store the heater while it is still wet or dirty.
Never wrap the power cord around the heater.
SERVICING THE HEATER
There are no user serviceable parts in this heater. If the heater is not operating correctly,
please check the following:
You have followed the instructions correctly
That the heater has been wired correctly and that the wall socket is switched
on.
That the mains power supply is ON.
That the plug is firmly in the mains socket.
