4
Exterior
· Use a soft, damp cloth to clean the exterior.
·
DO NOT
use abrasive cleaners. Dry exterior thoroughly before use.
·
DO NOT
immerse Kettle in water or other liquid.
7. If you want to use the Kettle again, allow the thermal safety switch to cool
down for 15 – 20 seconds then depress the On/Off Switch to the On
position. If the On/Off Switch does not remain in the ‘On’ position,
the Water is hot enough to use without reheating.
8. Unplug cord from wall outlet. Grip the Kettle by the Handle only, as the
surface and lid will be hot.
9. Place the Kettle on a heat resistant surface after use.
10. If the Kettle is accidently switched on when empty, the thermostat will
automatically cycle switching the Kettle off and allowing it to cool down
then switching it back on. If this situation occurs, unplug the Power Base
and let the Kettle cool before refilling.
11. It is recommended that the power cord be disconnected from the wall
outlet when not in use.
CARE AND CLEANING
1. Unplug power cord from wall outlet. Empty out remaining water and
allow Kettle to cool before cleaning.
3. All servicing, other than cleaning, should be performed by an authorized
service representative. See Warranty section.
4.
DO NOT
ALLOW WATER TO ENTER THE BASE OF THE KETTLE.
5.
DO NOT
IMMERSE KETTLE IN WATER OR ANY OTHER LIQUID.
2. Rewind cord by turning the wheel underneath the Kettle.
