7. If kettle is plugged in dry or is allowed to boil dry, the thermostat will
automatically cycle the element off to prevent the kettle from overheating.
If this situation occurs, unplug power cord and let kettle cool before
refilling.
8. Power cord must be disconnected from wall outlet when kettle is not in
use.
CARE AND CLEANING
1. Unplug power cord from wall outlet. Empty out remaining water and allow
Kettle to cool before cleaning.
2. Use a soft damp cloth to clean the outside of the Kettle.
DO NOT
USE ABRASIVE CLEANERS.
DO NOT
IMMERSE KETTLE IN WATER OR OTHER LIQUID.
3. Under normal use, a deposit of scale may form on the inside of the Kettle
and cause some discolouration. Scale, which has accumulated inside the
Kettle, can be removed by boiling equal parts of white vinegar and water
(250 ml/1 cup of each is recommended). Once the water has boiled, allow
mixture to stand several hours or overnight. Empty out mixture and fill
Kettle to the MAX level with fresh water. Bring water to a boil and discard.
For heavy scale build-up, repeat this process.
NOTE:
This build-up can be delayed by pouring out old water and refilling
before each use.
4. All servicing, other than cleaning, should be performed by an authorized
service representative. See Warranty section.
4
Booklet_JK1286_Eng_Silhouette 4/4/12 12:18 PM Page 4
