5. Depress the On/Off Switch to the ‘On’ position. The Indicator Light will
illuminate to indicate that the Kettle is in the boil cycle. Once the water has
boiled, the On/Off Switch will automatically switch to the ‘Off’ position and
the Indicator Light will go out.
6. If you want to use the Kettle again, allow the thermal safety switch to cool
down for 15 – 20 seconds then depress the On/Off Switch to the ‘On’
position. If the On/Off Switch does not remain in the ‘On’ position, the
Water is hot enough to use without reheating.
7. Unplug cord from wall outlet before lifting Kettle from Power Base. Grip the
Kettle by the Handle only, as the surface and lid will be hot.
8. Return the Kettle to the Power Base or place on a heat resistant surface
after use.
9. If the Kettle is accidently switched on when empty, the thermostat will
automatically shut it off to prevent the Kettle from overheating. If this
situation occurs, unplug the Power Base and let the Kettle cool before
refilling.
10. It is recommended that the power cord be disconnected from the wall
outlet when not in use. DO NOT attempt to connect any other appliance to
the Power Base or tamper with the connector in any way.
4
Booklet_JK-1103_ENG:Salton Booklet 5/27/09 9:31 AM Page 4
