Salton GP-1096 Instruction Booklet Download Page 3

15. Always attach plug to appliance first, then plug cord into the wall outlet.

To disconnect, turn any control to ‘OFF’, then remove plug from wall 
outlet. To unplug grasp plug and pull smoothly and firmly from the wall 
outlet. DO NOT attempt to unplug unit by pulling or tugging on the cord.

16. Do not turn unit on its side when in use.
17. Do not use water in the unit.
18. Do not use appliance for other than intended use as described in this 

booklet.

19. Do not leave unit unattended while in use.
20. DO NOT disassemble unit or attempt to make any repairs yourself.

Incorrect assembly or repair could result in a risk of fire, electric shock or 
injury to persons when operating the unit.

21. Store unit in a cool dry place. Allow unit to cool completely and loop 

power cord loosely around unit before storing.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

DESCRIPTION OF PARTS

1. Clothes Hanger 
2. Tie/Belt Hanger 
3. Power Indicator Light 
4. Timer Dial 
5. Stopper
6. Base 
7. Front Pressing Plate 
8. Pressing Bar 
9. Heating Plate 
10. Storage Compartments

3

TM

2

1

3

5

6

7

8

9

10

4

Booklet GP-1096_ENG_Final_R.qxd  10/21/08  12:19 PM  Page 3

Summary of Contents for GP-1096








Reviews: