BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Gently wash the Tea Infuser Assembly in warm soapy water and allow
to dry.
4. Fill the Kettle with 1 L (4 cups) of cold tap water and bring to a boil.
5. Add 500 mL (2 cups) of white vinegar and let stand for at least 1 hour
or overnight. Discard.
6. Fill the kettle to the maximum fill line with cold tap water. Bring to a
boil and discard. Repeat.
7. The kettle is ready to use.
HOW TO USE
1. Open the Lid by lifting it straight up. Fill the Kettle through the lid
opening with a minimum of 500 mL (2 cups) of water.
2. DO NOT attempt to fill the Kettle while it is plugged into the wall outlet.
DO NOT use for other than boiling water. Other liquids will
contaminate the interior of the kettle.
DO NOT fill past the MAX level printed on the glass. Overfilling may
cause water to spit out when boiling.
3. Place the Lid back on the Kettle.
4. Place Kettle and Base on a flat, level, dry, heat resistant surface.
Ensure that it is correctly engaged on the Base.
5. Plug into a 120V AC wall outlet. The display will show the actual water
temperature. The Kettle is now in standby mode.
NOTE: If no selection has been made in 3 minutes, the display will
shut off and the Kettle will enter Sleep Mode. Press any button once
to “Wake up” the Kettle.
NOTE: Never plug kettle into an electrical outlet when the kettle is
empty.
6. Direct kettle spout away from cabinets, walls, etc. to prevent possible
steam damage.
7. The default temperature is 100°C (212°F). The variable temperature
range is 40 to 100°C (105 - 212°F) in 10 degree Celsius increments.
8. To boil water:
- Press the power button once.
- To switch between the Celsius and Fahrenheit display press the
°F/°C button once.
- The display will show 100°C (212°F) for 3 seconds then the display
will switch to the actual water temperature. The display temperature
will increase until the kettle reaches 100°C (212°F).
- Once the water has boiled the Kettle will shut off and the kettle will
beep three times.
- The display will show 100°C (212°F) for 3 minutes then the display
4
