3
PARTS DIAGRAM
OPERATING INSTRUCTIONS
Before First Use
1.
Remove the unit from the packaging and remove all stickers, packing material, and literature.
2. Wash the carafe and lid in hot, soapy water – rinse thoroughly. These parts are also
dishwasher-safe.
3. Clean the inside of your coffeemaker by lifting the reservoir lid and pouring cold water into
the reservoir up to, but NOT exceeding, the 8- cup level. Close the reservoir lid
4. Pull open and swing-out the filter basket, But DO NOT add coffee grounds. Ensure this is
clean.
5. Place the carafe with lid in the coffeemaker and switch “ON”. When all the water has brewed
through the permanent filter, switch off the appliance and discard the water.
6. Let the unit cool down for about 5 minutes and repeat the process with fresh, cold water.
For a perfect taste, carry out 2 or 3 boil-processes with fresh water only i.e. without coffee:
