IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical hazards, do not immerse cord, plugs, or the
appliance in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near
children. Children should be supervised to ensure that they do not play
with the appliance.
5. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
6. Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts, and before cleaning the appliance.
7. Avoid contacting moving parts.
8.
DO NOT
operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the manufacturer for examination, repair or electrical or
mechanical adjustment. All servicing, other than cleaning, should be
performed by an authorized service representative. See Warranty section.
9. The use of accessories or attachments not recommended by the manufacturer
may cause fire, electric shock or injury.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter, or touch hot surfaces.
12. Do not place on or near a hot gas or electric burner, or in a heated oven.
13. Keep hands, hair, clothing, as well as spatulas and other utensils away from
beaters and dough hooks during operation to reduce the risk of injury to
persons, and/or damage to the mixer.
14. To disconnect, turn the control to OFF, then remove plug from wall outlet.
15. Unplug before inserting or removing parts.
16. Remove beaters and dough hooks from the mixer before washing.
2
HM1580_Booklet_ENG_Salton Booklet 4/25/16 11:14 PM Page 2
