5.
OPERATION
Osci l l at i on Swi t ch
LED
2
1
OFF
3
Ti me but t on
Adj ust Speed Swi t ch
1.
Push down button “1”,”2” or “3” to select the corresponding low, middle or strong
wind.
Push down button “0/OFF” to stop the fan running.
2.
While the fan is running, you can select any timing value within
120 minutes by turning the timer control.
3.
Push down the oscillation switch to select oscillating with selected
wind speed function. Push again to stop oscillation.
4.
Hold the fan body with hands, the unit can also turn 30° to left and right separately,
5 directions to choose from.
Note
: Keep the plastic parts away from greasy dirt. Do not use it in kitchen in order to avoid the
parts becoming obstructed by grease dirt. Fans are usually damaged by obstruction of greasy dirt.
6.
SAFETY POSITIONING
•
The fan must not be located immediately beneath a socket outlet.
•
Only use the fan when it is standing upright, i.e. on its base
•
For your own safety and that of others, do not use the fan in the immediate surroundings
of a bath, shower or swimming pool. Ensure that the appliance cannot fall into water
(bath wash basin, shower cubicle etc).
•
Keep the mains cord at a safe distance from the air inlet and outlet grilles.
7.
CLEANING
•
Always disconnect the cord from the electrical outlet when cleaning the fan.
•
Light accumulated dust may be removed from the fan with a soft cloth or vacuum
cleaner, using the brush attachment. Interior dust can usually be removed by using a
vacuum cleaner in its blower mode with a crevice tool attachment.
•
Wipe the exterior surfaces of the appliance occasionally with a damp cloth moistened
with a solution of mild detergent and water. Ensure that the excess water has been
squeezed from the cloth before using on the appliance
•
Dry the casing thoroughly with a dry cloth before operating the fan.
4
