G
B
7
7. The user number flashes.
8. Press
START
button.
9. Wait while scale confirms user settings and then displays zero. Allow scale to switch to
clock mode.
10. Repeat procedure for a second user, or to change user details.
Note:
To update or overwrite the memorised data, follow the same procedure, making changes
as required.
Weight & Body Analysis Readings
Each user can save up to 30 sets of results to the scale.The bar chart icon on the scale display
indicates the user memory status.
Position the Salter MiBody on a flat level surface.
1. Press
ON/SET
button.
2. Select your user number using
▲
and
▼
buttons.
3. Press
START
button.
4. Wait while scale confirms user settings (and if applicable displays your previous results).
5. Zero is displayed.To change to st, kg or lb press button on underside of scale.
6. Step on to scale with BARE FEET.
7. Your weight is displayed.
8. Wait.Your weight is displayed again (you can step off the scale now) followed by your BMI, body
fat, body water, muscle mass, visceral fat and BMR.
9. Your results are repeated (to toggle between results press the
▲
,
▼
,
ON/SET
or
START
buttons).
10. Your results are saved to the scale memory.
11. The scale returns to clock mode.
Note:
If
FULL
is displayed then the memory is full.You need to transfer your results to the USB
flash drive, otherwise your earliest results will be overwritten
HG7789_MiBody_IB.qxd:Layout 1 17/9/07 13:59 Page 7
