OWNER’S MANUAL V072023 ENGLISH
M-041 INDOOR CROSS
This manual can be downloaded on
www.salter.es
Workout setting
. Press MODE/ENTER key to select the function of TIME, DISTANCE, CALORIES and PULSE. Use SET Key
for setting and press MODE/ENTER key for confirmation.
. For instance the time set-up, when the time value is blinking, you can use SET Key to adjust the
number. Press MODE/ENTER key for confirmation and skip to next set-up. The set-up of DISTANCE,
CALORIES and PULSE is the same as TIME set-up.
. Once the workout begins and the console picks up the exercise signal, the value of SPEED/RPM,
TIME, DST and CAL will count up on the display.
Recovery
1.
The RECOVERY key will only be valid if pulse is detected.
2.
TIME will show "0:60" (seconds) and counts down to 0.
Computer will show F1 to F6 after the countdown to test heart rate recovery status. User can find the
heart rate recovery level based on the chart below.
3.
Press RECOVERY key again to return to the beginning.
F1
Outstanding
F2
Excellent
F3
Good
F4
Fair
F5
Below average
F6
Poor
Trouble shooting:
. When the display of LCD is dim, it means the batteries need to be changed.
. If there is no signal when you pedal, please check if the cable is well connected.
NOTE:
1. When stop training for 4 minutes, the main screen will be off.
2
.
If the computer displays abnormally, please re-install the batteries and try again.
3. The console will be shown by bluetooth as “iConsole” when searching through the APP with compatible
connectivity.
4. When connected to an APP, the information will be erased from the console screen and the data will
appear in the APP.