OWNER’S MANUAL V.062023 ENGLISH
M-9640/L BIKE FENX
This manual can be downloaded on
www.salter.es
STEP 15 – Hand Wrist Pad
Assembly
Attach the Hand Wrist Pad (49) to the
Stationary Handlebar (48) and
secure with 2pcs Washers
(6x13x1.0t)(153),
2pcs Lock Washers (M6)(96), 2pcs
Socket Bolts (M6xp1.0x12mm)(154).
STEP 16 – Accessory Tray & Pedal
Assembly
NOTE: For shipping purpose, 2pcs
Bolts (M5xp0.8x25mm)(127) are
attached on the Upright Post (56).
a. Remove 2pcs Bolts
(M5xp0.8x25mm)(127) from the
Upright Post (56).
b. Place the Accessory Tray (60) on
the Upright Post (56) and fully secure with 2pcs Bolts (M5xp0.8x25mm)(127).
c. Thread the Right Pedal (45) clockwise onto the Right Crank located inside the Right Crank Cover (43) as shown.
Tighten the pedal securely. Repeat the same procedure to thread and tighten the Left Pedal (44) counter-clockwise
onto the Left Crank as shown.
STEP 17 – Remove 12V 3A Adaptor for LED Console Usage
This LED console only requires FOUR AA rechargeable batteries to power on, there is no need to plug into adaptor. If
the item has plugged into 12V 3A adaptor, please remove the adaptor away from the item.
NOTE:
**For the final step, make sure all the bolts and nuts are fully tightened before using the item.
**For the final step, make sure all the bolts and nuts are fully tightened before using the item.
**For the final step, make sure all the bolts and nuts are fully tightened before using the item.
**For the final step, make sure all the bolts and nuts are fully tightened before using the item.
**Check whether the levelers are even on the floor (if the levelers are not even will produce noise), if not
,
review the LEVELING NOTE.