IB-BNM10-GB-1217-01
INSTRUCTIONS FOR USE:
IMPORTANT - Preparing the appliance for use
The Shiatsu Massager comes with a screw located on the back of the unit to
protect the massage mechanism during shipment, which must be removed
before the first use to allow the shiatsu feature to function. Use the
provided Allen key. Then, properly dispose of the screw.
WARNING Error:
all remote control LEDS flash for a few seconds.
Cause:
massager overloaded.
Solution:
ensure the allen key bolt/screw has been removed from back of
the massage cushion (using the allen key included). Should the condition
continue after this please contact your HoMedics service centre.
Failure to remove screw may cause permanent damage to the
appliance.
Strapping System
This massage cushion incorporates a unique strapping system which allows
you to fasten it to almost any chair. Just slip the straps over the seat or
chair and adjust fastening straps to secure. Your massager won’t slip or
slide away.
MAINTENANCE:
Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only with a
soft, slightly damp sponge.
• Never allow water or any other liquids to come into contact with the
appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint
thinner etc to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place. Avoid contact
with sharp edges or pointed objects which might cut or puncture the
fabric surface. To avoid breakage, DO NOT wrap the power cord around the
appliance.
DO NOT
hang the unit by the cord.
Note:
Do not use this product for more than 15 mins at a time. There is a 15
minute auto shut-off on this appliance for your safety. This feature should
not be considered as a substitute for ‘OFF’. Always remember to switch the
appliance off when not in use.
PRODUCT FEATURES:
DEMO BUTTON -
For a brief
demonstration of the features of
the Massager, press the Demo
button. The unit will briefly
go through each function.
Once complete, the unit
automatically turns off. The LED
light will blink to indicate the
active functions.
SPOT SHIATSU
- While the unit
is in Shiatsu massage, press
either button to stop and focus
the Shiatsu action in one place.
Once the unit is operating in
Spot Shiatsu, you may adjust the
mechanism position by holding
down either button until the
desired position is reached.
SHIATSU MASSAGE
- Shiatsu
is a deep kneading circular
massage.
SHIATSU PROGRAMS
– Choose
from 3 preset programs where
the Shiatsu massage travels up
and down in a specific area of
the back. To select a program,
simply press the button and the
LED will illuminate. To deselect,
press the button again or press
another button.
Full back
Upper back
Lower back
POWER BUTTON
- To turn on the
unit, first press the POWER button.
The LED indicator will illuminate
and confirm your selection. To
turn off the unit, simply press the
button again. The LED indicator
will blink while the back massage
mechanism returns to its lowest
point and then it will turn off.
NECK MASSAGE
– Click this
button to add a neck massage.
VIBRATION MASSAGE
– Adds
vibration massage to upper legs/
thighs. Pick your favourite intensity
for a more relaxing or invigorating
massage.
HEAT
- For soothing heat when
massage is on, simply press the
heat button and the corresponding
red L.E.D. light will illuminate. To
deselect, press the button again
and the corresponding L.E.D. light
will turn off. For your safety, heat
cannot be turned on if massage is
not selected.
MOVING SHIATSU MECHANISM
FKA Brands Ltd
Somerhill Business Park, Tonbridge, Kent TN11 0GP, UK
Customer Support: +44(0) 1732 360783
|
