232928 10/19 | 85-001165_INST_A
EXP RUBBER STRAP INSTRUCTIONS
2
For additional product and safety information go to salsacycles.com/safety
Insert the strap end through buckle slot (Fig. 6). Pull the strap
back so the strap hole lays over the buckle hook (Fig. 7).
Once the strap is wrapped around the cargo and through the
buckle and has slight tension, pull the strap an additional 2–3
hook slots to provide adequate tension without over stretching
the strap. Slide the strap band along the strap in order to capture
the strap end (Fig. 8).
WARNING:
Use extreme caution when attaching irregular
loads or loads with hard edges. Irregular cargo may shift during
transport and hard edges could damage the cargo strap. Load
loose cargo into stuff sacks and dry bags with webbing loops so
that it can be properly secured. Cargo can shift under continued
compression, so check straps periodically for adequate tension.
Instructions for Use with Salsa EXP Series
Anything Cage and Anything Cage HD
(See EXP Series Anything Cage instructions for specifics
of assembly)
1. Place the EXP Series Anything Cage Bag in the EXP Series
Anything Cage or the Anything Cage HD. Pass the Salsa EXP
Rubber Straps through the webbing on the outside of the bag
(Fig. 9).
2. Route the top strap through the upper portion of the Anything
Cage (Figs. 10, 11). Route the top strap through the second
daisy strap (Fig. 12). Follow assembly instructions on page
one to secure the strap and your cargo.
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
