8
2.3.6
Connecting to the network
After the SIM card is unlocked, the mobile phone searches for network service. Once connected, the cellular service provider will show on the
centre of the screen. The mobile phone is at idle stage and can make or receive a call.
Attention
:
If ONLY EMERGENCY shows on the screen, it means you are not in the service area of the network only the EMERGENCY call can
be connected.
3 Basic
functions
3.1
Making a call
When cellular network service provider shows on the screen, you can receive or make a call through network. The received signal strength is
shown on the up left corner of the screen (maximum 4 lines—best signal condition).
The quality of network connection is affected by the environment. Moving within small scale can improve the network connection quality.
To make a call, enter the phone number, including the area code, and press the
Send key
to dial with different SIM card.
Tips
: For informational calls, add the
+
character that replaces the international access code, and enter the country code, area code (omit the
leading 0, if necessary), and phone number.
To make a call using the saved contacts, press
Right Soft key
in idle mode. Select the contact and press
Send key
to dial with different SIM
card. Press
OK key
to select
IP dial
, and then select SIM card to dial. Please set IP number and active it before using, refer to chapter 5.5.2.5
IP dial
.
To make a call using the log, scroll to desired number or name and press
Send key
to dial with different SIM card.
3.2
Answering a call
To answer a call, press the
Send key
.
To reject a call, press the
End key
.
If the
answer mode
of
any key
is turned on in current user profile, you can press any key to answer it (except
End key
and
Right soft key
). If
the ear phone is connected, you can answer a call though ear phone. If the
answer mode
of
auto
is turned on in Headset profile, the phone will
answer the call automatically after 5 seconds.
3.3 Emergency
call
If the cellular network service does not cover that area, ONLY EMERGENCY shows on the screen. That means you are not in the service area of
the network only the EMERGENCY call can be connected. If you are in area covered by network service, the Emergency call can be made without
inserting SIM card.
3.4
Options during a call
During the call, you can press
OK
key
to switch on/off loudspeaker. Press
Right soft key
turn on or off the microphone, Press
Left soft key
access to option menu. The option menu is similar with Function menu. It is only possible to get into option menu during a call. The functions such as
on hold, forward or making a multiparty call need network support. Please contact your network service provider for detail.
In option menu you can select among:
Hold single call
: put the call on hold or recover it.
End single call
: end the call.
New Call
: make a new call.
Phonebook
: get into the menu of Phonebook.
Message
: get into the menu of Messaging.
Sound recorder
: record the conversation.
Background sound
:
The background noise calls.
DTMF
: Press
Left soft key
to switch on /off.
Conference
: the function need network support. Please contact your network service provider for detail.
Attention
:
Some options are available under certain condition. Such as Switch only can be used when there are more than one call are
connected at the same time.
4 Input
Method
Keypad definition
Navigation key (up, down, right and left keys):
Generally using for moving cursor or selecting characters.
#
key:
pressing “
#
” key will alter different input methods, with corresponding input method icon at the left side of Icon zone Digit key (2-9) In
English input status; these keys indicate letters on each key;
* Key:
press * key to activate punctuation marks and character input method.
5 Function
Menu
Attention
:
Some menus only appear under circumstance.
5.1
Using the function Menu
In idle mode, press
Left soft key
access main menu, press
Right soft key
access Phonebook.
In idle mode, press
Up/Down key
access usual functions, You can set the functions in
Setting -> Phone settings -> Dedicated key
.
In Function Menu, press UP or Down to find the function, Press
OK key
to enter the selection, Press
Right soft key
to exit current menu.
Press
End key
to idle screen.
Summary of Contents for SM401
Page 1: ...1 SM401 User Manual...