17
18
If the screen blinks, your TV is set to the wrong system, Press the N/P button to
return to normal.
Also refer to the instructions of your TV.
SPDIF OUTPUT
Select SPDIF/OFF to switch off the digital audio signal output.
Select RAW to set the digital audio signal output to its raw format (DTS/Dolby
Digital 5.1).
Select SPDIF/PCM to set the digital audio signal output to PCM format.
Notice:
When SPDIF/PCM is set, the LPCM OUT feature sample rating for
the analog audio input (48 kHz or 96 kHz).
DOWNMIX
Select LT/RT to mix 5.1-channel audio into left channel and right channel.
Select STEREO to mix 5.1 channel audio into signal stereo.
Notice:
This function is only available for 5.1-discs with Dolby AC-3 encoding.
DUAL MONO
Stereo: both channels as is. STEREO is the default setting.
L-Mono: left channel only.
R-Mono: right channel only.
Mix-Mono: the average of both the left and right channel.
DYNAMIC
Select the value for the dynamic range compression.
Audio setup page
Preference setup page
Notice:
The preference menu can only be accessed when the disc tray is
open or empty, or when the disc in the disc tray is stopped.
PASSWORD
Enter the current password in the first box.
Enter the new password in the second box. Enter the new password again
in the third box to confirm.
Notice:
The default password (0000) is always active. Even if the password
has been reset.
PARENTAL
Set a rating for movies played by the appliance. Movies rated higher than
the level set for the parental lock can not be viewed.
The password to reset the rating is 0000.
Notice:
This function is only available with discs that have parental rating encoded.
DEFAULT
Restore all default settings of the appliance, except the settings for the menu items
PARENTAL and PASSWORD.
Notice:
This function can also be executed with the RESET button on the remote
control.
