EN
3
Note: While the buzzer alarm volume is fixed and cannot be adjusted, the radio alarm volume can
be adjusted to your desired level using the VOLUME buttons (6) (7). To select a radio station to
wake up to, see the section on “USING THE RADIO”.
Snooze function
When the alarm sounds, press the
SNOOZE (9)
button to stop the alarm temporarily. The
“ALARM 1 indicator (2)”
or
“ALARM 2 indicator (5)”
will continue to flash and the alarm will
sound again after 9 minutes. To cancel the SNOOZE function and repeat the alarm the next day,
press the
ON/OFF
(7)
button.
Sleep Function
With this function, you can listen to the radio for up to 120 minutes, after which it will turn off
automatically.
1.
When the unit is switched on, press the
SLEEP (9)
button repeatedly to select the duration:
120, 90, 60, 45, 30, 15, 05 minutes or OFF.
2.
When the preset sleep duration elapses, the radio turns off automatically. If you would like
to know the remaining playing time, press
SLEEP (9)
button once.
3.
To cancel the sleep function before the end of the set time, press the
ON/OFF
(7)
button
to turn off the radio immediately.
Using the Radio
1.
Press the
ON/OFF
(7)
to turn on the radio.
2. Press and hold one of the
<TUNING>
buttons
(10) (11)
to start automatic tuning up/down.
Release the button when the unit is receiving a station you would like to listen to. For manual
fine-tuning, you can press it briefly to adjust the frequency step by step.
3. Press the
ON/OFF
(7)
button to turn off the radio.
For optimum reception
Extend and position the FM antenna to achieve optimum reception.
Preset radio stations
You can store up to 10 stations.
1. Use
the
<TUNING>
buttons
(5) (8)
to search for a station. Press and
hold the
MEMORY
button to store the station and a number to be
assigned for the preset will be flash.
2. Press
the
<TUNING>
buttons to change the number.
3. Press
the
<MEMORY>
button again to confirm the setting.
Listening to a preset station
While listening to the radio, press the
MEMORY
button to select a preset station.
The current time is always displayed. When you change to Radio mode, the frequency will be
displayed for 5 seconds and then the unit will go back to displaying the time.
Dimmer Control
In clock mode, repeatedly press
DIMMER
to adjust the brightness of display (bright or dim).
