Salora 40UHS3500 Page 12 Operating Instructions Manual Download

Page: 12 / 30

English

- 75 -

You can use USB hubs with your TV’s USB inputs.
External power supplied USB hubs are recommended
in such a case.

It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.

Note:

When viewing image files the

Media Browser menu

can only display 1000 image files stored on the connected

USB device.

Media Browser Menu

You can play photo, music and movie files stored on a

USB disk by connecting it to your TV. Connect a USB
disk to one of the USB inputs located on the side of
the TV. Pressing the

Menu

button while in the

Media

Browser

mode will access the

Picture

Sound

and

Settings

menu options. Pressing the

Menu

button

again will exit from this screen.

You can set your

Media

Browser

preferences by using the

Settings

menu.

Loop/Shuffle Mode Operation

Start playback with the

Play

button and activate

All files in the list will be

continuously played in original
order

Start playback with the

button and activate

The same file will be played

continuously (repeat)

Start playback with the

Play

button and activate

All files in the list will be

played once in random order

Start playback with the

Play

button and activate

All files in the list will be

continuously played in the
same random order.

FollowMe TV (if available)

With your mobile device you can stream the current
broadcast from your smart TV using the

FollowMe

feature. Install the appropriate Smart Center

application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.

Note: This application may not be compatible with all mobile
devices. Both of the devices must be connected to the same
network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.

The

CEC

option in the

System>Settings>More

should be set as

Enabled

at first. Press the

Source

button and select the HDMI input of the connected
CEC device from the

Sources List

menu. When

new CEC source device is connected, it will be listed
in source menu with its own name instead of the
connected HDMI ports name(such as DVD Player,
Recorder 1 etc.).

The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected.

To terminate this operation and control the TV via
the remote again, press

Quick Menu

button on the

remote, highlight the

CEC RC Passthrough

and

set as

Off

by pressing Left or Right button. This

feature can also be enabled or disabled under the

System>Settings>More

menu.

The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to replace
other cables between the TV and the audio system
(A/V receiver or speaker system).

When ARC is active, TV does not mute its other audio
outputs automatically. So you need to decrease TV
volume to zero manually, if you want to hear audio
from connected audio device only (same as other
optical or co-axial digital audio outputs). If you want
to change connected device’s volume level, you
should select that device from the source list. In that
case volume control keys are directed to connected
audio device.

Note: ARC is supported only via the HDMI3 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with

the TV. The volume can be controlled using the
remote control of the TV. To activate this feature set
the

Speakers

option in the

System>Settings>More

menu as

Amplifier

. The TV speakers will be muted

and the sound of the watched source will be provided
from the connected sound system.

Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.