Salora 26LED7100C, Operating Instructions Manual

Page: 57 / 95

English - 55 -
Configuring Date/Time
Settings
Select Date/Time in the Settings menu to configure
Date/Time settings. Press OK button.
Use “ • ” or “ ” buttons to highlight Date / Time.
Date,Time,Time Settings Mode and Time Zone Setting
will be available.
Use “ ” or “ ” buttons to highlight the Time Settings
Mode. Time Settings Mode is set using “ ” or “ ”
buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Date/Time and Time Zone
options will not be available to be set. If MANUAL
option is selected as the Time Zone can be altered:
• By pressing “ ” or “ ” buttons select Time Zone.
Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Date/Time on the top
of the menu list will then change according to the
selected Time Zone.
Changes are automatically stored. Press •
“M”
to
exit.
Configuring Source Settings
You can enables or disable selected source options. The
TV will not switch to the disabled source options when
“SOURCE” button is pressed.
Select • Sources in the Settings menu and press OK
button.
Press“
• ” or “ ” buttons to select a source.
Use “ • ” or “ ” button to enable or disable the
selected source. Changes are automatically
stored.
Note: YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
Configuring Other Settings
To view general configuration preferences, select Other
Settings in the Settings menu and press OK button.
Operation
Press “ • ” or “ ” buttons to select an item.
Use “ • ” or “ ” button to set an option.
Press • OK button to view a sub-menu.
Menu Timeout : Changes timeout duration for menu
screens.
Scan Encrypted : When this setting is on, search
process will locate the encrypted channels as well. If
it is set as Off , encrypted channels will not be located
in automatic search or manual search.
Backlight (optional) : This setting controls the
backlight level and it can be set to Auto, Maximum,
Minimum, Medium and Eco Mode.
Power Save Mode : Use “ ” or “ ” button to select
Power Save Mode. Press “ ” or “ ” button to set
Power Save Mode as On or Off. See the section,
“Environmental Information” in this manual for further
information on Power Save Mode.
Note : Backlight function will be invisible if Power Save
Mode is set to on.
Blue Background : Activates or deactivates blue
background system when the signal is weak or
absent.