I
Operation Method
♦ Operation Cautions
&
Warning!
• Do not put acidic or alkaline substances in this product.
• Do not move this product when it is live or working.
• Please do not open the cabinet door in working condition to prevent scalding.
• Do not use or store this product in an environment with acidic gas or humid air to avoid malfunction
and danger.
• Do not use this product (such as alcohol, thinner, gasoline, nail polish remover, spray, etc.) near
high-temperature and high-heat objects or near flammable objects.
&
Attention!
• When the product is working for a long time, there is a significant temperature rise.
• When using the UV function, the working time should be controlled within 1 to 2 hours,
otherwise it will cause damage to the item due to being placed under the purple line for a long time.
• After each use of this product, you must turn off the power switch, take out the towel rack, and dry
the water on the inner tank and door frame with a rag. If you do not use it for a long time, please
unplug the power plug.
• If this product accidentally breaks the glass on the observation window during use, please turn off
the power immediately and contact the manufacturer or agent for replacement. This glass is made
through a special process, which can block ultraviolet rays and cannot be replaced by ordinary glass.
♦ Operation method
(operation procedure)
G) Plug in the power cord.
(I) Open the cabinet and place the wet towels neatly on the towel rack; close it and check whether the
sealed magnetic strip between the door frame and the cabinet body is well sealed. After
everything is in order, you can turn on the "POWER" button on the right side of the towel cabinet
to start the heating device, and the host will start to heat up. When the temperature rises to 70
degrees, it will enter a constant temperature state; you can activate the "OZONE" ultraviolet rays
according to your needs, and the towel cabinet will light up at this time. The purple-blue light indicates
that the host enters the working state.
® After every use, you need to clean the water in the drip tray: use your fingers to buckle the grip
position of the drip tray and pull the drip tray out, then you can pull out the drip tray and clean the
water in the tray. Push the tray back according to the pulled-out position to install the drip tray.
Summary of Contents for SEQ346
Page 3: ......
