A
B
780mm
1175mm
400mm
610mm
345mm
W
all
655mm
1175mm
400mm
1
2
3
4
5
6
7
8
9
11
12
13
14
15
16
17
18
19
20
salonco.com.au
3
Mounting
Before installation, secure and bolt down basin with
dyna bolt to prevent it from tipping over.
Layout
It is important to know your floor plan when choosing a spot for your basin. As each workspace
is different, you must decide on the most efficiant layout for your space. The two options you
have are detailed below:
• Washing from the back of the basin
• Washing from the side of the basin
When choosing between these options you must leave ample room to manoeuvre around the
basin.
Diagram 1.
Diagram 2.
Considerations:
• Allow for necessary room around the unit for free movement.
• If installing against the wall, a recommended minimum distance of 80mm between wall and
back of basin is suggested to allow free movement of basin.
•
If plumbing location is in wall (see Diagram 1), for neatness of finish, it is preferable to bring
water and waste into the basin through the same hole.
•
If plumbing location is on floor (see Diagram 1), place basin over pipe.
Plumbing Options
If washing from behind, allow a minimum of 400mm of
space behind your basin to provide room for access.
If washing from side, allow 400mm of space.
Warning: Do not let children climb on basin.
2. From Floor To Basin Stand
From under basin stand, connect plumbing to
the floor
1. From Wall To Basin Stand
From behind the basin stand, connect plumbing
to wall
Summary of Contents for artie SC2919
Page 1: ...salonco com au ...