salmson Cleanskid Series, Installation And Starting Instructions

Page: 18 / 20

10. Faults, causes and remedies
DANGER! Make sure that the unit has been
turned off at the main switch before doing any
maintenance or repair work on it.
If the fault cannot be remedied, please contact
the trade or your nearest Salmson-After-sales
Service or agent.
18
SALMSON 03/2015
English
Faults Causes Remedies
The circulator is noisy Air in system Bleed the circulator. Refer to circulator
manual
Suction pressure too low Increase the pressure in the network
Foreign bodies in impeller Clean the impeller. Refer to circulator
manual
The circulator fails to start Shaft jammed by fouling after pro-
longed shutdown
Refer to circulator manual
No power supply to the circulator
Capacitor faulty
Foreign bodies in impeller