- 3 -
BR-124026
OPERATION
Trying up your scale
1.
This scale operates on two 1.5 V AAA batteries. Open the cover of battery compartment which is located in
the back of the scale, install the batteries into the compartment and put back the cover.
2.
The scale needs to be initialized before first use or after battery replacement. Step on the scale platform.
The display will turn on, showing your weight automatically. The scale is now ready for use.
Quickly weighing yourself
If you would like to weigh yourself without advanced measuring, follow the steps below.
1.
Make sure the batteries are installed and the scale is placed on a hard even surface.
2.
Gently step on the scale, then the scale will be automatically turned on. Stand evenly on the scale without
moving and wait until your weight shown on display is stable and locked.
Note: Do not step on the scale immediately after the unit is just moved. Wait for a few minutes and then step on
the scale to weigh yourself.
Setting up your personal data / Advanced measurement
1.
Press “SET” to input personal data. The scale supports up to 10 users’ data.
1)
Press “SET” and the display flashes, use the selection button “
” or “
” to select user number from
“0” to “9”. Press “SET” to confirm the user selection.
2)
Press “
” or “
” to set the age from 10 – 99 (years old). Press “SET” to confirm the age selection.
3)
When the height value is flashing, press “
” or “
” to set the height from 100 – 240 cm. Press “SET”
to confirm the height selection.
4)
Select the gender by pressing “
” or “
”.
is for male;
is for female. Press “SET” to confirm
the gender selection.
2.
After finishing all the settings, the LCD display will flash all the data until the “0.0” shows up. Then you can
step onto the scale.
3.
Several seconds after your weight value is settled, the measurement of weight, fat, water, muscle, bone,
calories and BMI (Body Mass Index) will cycle 2 times in the LCD display. Your body state is concluded at the
side of the display by showing “Underfat” / “Healthy” / “Overfat”. See below illustration for a reference.
LCD display
CAUTION: Women who are pregnant, children under 10 years old and persons with medical implants (e.g.
heart pacemaker) are not suitable to use the appliance for above functions.
NOTE:
During the input, data can only be adjusted when it is flashing on the LCD display.
The numerals in digital display will be fast changed when you long press the selection button “
” or “
”.
There must be no skin contact between your feet, legs or knees. Otherwise the measurement cannot be
