OPERATION OF YOUR MILK FROTHER
1. Place the appliance on a flat surface.
2. Then open the lid, insert the frothing paddle onto the shaft in the bottom of the container.
3. Fill the container with the desired amount of milk and replace the lid.
4. Connect the plug into a power outlet.
5.
a)I. Heating and thick foam: Press the FUNCTION button once, the indicator light
“Heating and thick foam” will light up. Then press the Start/Cancel button once, the
appliance will start to work. Once the temperature of the milk has reached the set value
the appliance will stop working.
b)II. Heating and thin foam: Press the FUNCTION button twice, the indicator light
“Heating and thin foam” will light up. Then press the Start/Cancel button once, the
appliance will start to work. Once the temperature of the milk has reached the set value
the appliance will stop working.
c)III. Heating without frothing: Press the FUNCTION button three times, the indicator light
“Heating without frothing” will light up. Then press the Start/Cancel button once, the
appliance will start to work. Once the temperature of the milk has reached the set value
the appliance will stop working.
d)IV. Frothing without heating: Press the FUNCTION button four times, the indicator light
“Frothing without heating” will light up. Then press the Start/Cancel button once, the
appliance will start to work. Once the temperature of the milk has reached the set value
the appliance will stop working.
6. When the appliance has stopped, open the lid, pour out the heated and frothed milk to
enjoy it.
7. Always turn off the milk frother and disconnect the power supply when not in use.
14
Caution:
Minimum 3 minutes rest time must be maintained between two continuous cycles,
otherwise, the appliance will automatically enter self-protection state after 5 cycles. The
working indicator light will flash, and the button will not activate when pressed, after about
5 minutes, the appliance will enter standby state and then you can continue using the
appliance.
NOTE:
Please clean the container according to the section “CLEANING AND MAINTENA-
NCE” between two continuous cycles.
Note:
During operation, you can stop the appliance by pressing the Start/Cancel button once.
NOTE:
The max milk quantity permitted is 125 ml (see Fig. 1), to avoid milk overflowing
after frothing. The min milk quantity permitted is 75 ml.
NOTE:
Please use whole milk (5-10℃).
