22
blue. The default ice mode is large ice. Touch the small ice function icon once to enter
the small ice timing mode. The operation is the same as the large ice timing mode.
5. Timing cleaning function: when the machine enters the standby mode, touch the timing
function icon to enter the timing function mode. The timing function icon flashes
blue. The default ice mode is large ice. Touch the cleaning function icon to enter the
timing cleaning mode. The
default display is 03:00, and the time is 3 minutes.
Touch the extra time icon
once, and the time increases by 1 minute. Touch the thermal
reduction time icon once, the time is reduced by 1 minute. After setting the time, the
time icon
displays the set time. Touch the power icon once, the power
icon is always on white light, the cleaning function icon is always on blue light, and
the timing function icon is always on blue light to start cleaning. When the set time is
up, the time icon
will be displayed as 00:00, the buzzer will sound 5 times, and
the machine will stop cleaning and enter the selection state.
5.1 Ice making status: when the machine is in ice making status, the power icon white
light is always on, the large ice function icon blue light on or the small ice function icon
blue light on.
5.2 Water shortage status: when the machine is in water shortage status, the icon of water
shortage status
is always on red light, and the buzzer sounds 5 times, all of which
are on white light, and the
on white light and shows
00:00.
5.3 Full ice state: when the ice storage capacity of the product reaches the set value, the
full ice alarm icon
is always on red light, the buzzer sounds 5 times, all of which are
on white light and shows 00:00.
6. In all States, touch the power icon once, and the product will enter the pause state.
The icon in the original state will be on and the blue light will flash. At this time, you can
select any mode from the large ice , small ice , self-cleaning icon , timing function
icon and preset function icon , or touch the power icon once again to restore the
original working state.
7. When the motor fails, the time icon
shows E1:00, and press the power icon
to remove the fault.
8. Buzzer: every time you touch
these icons, the buzzer will sound
once. In case of water shortage alarm, ice full alarm, cleaning completion, preset time
completion and timing completion, the buzzer will sound 5 times.
9. Power icon : in all modes to be selected, touch the power icon once to enter
the working state. In all working modes, touch the power icon once to enter the
pause state. At this time, you can select other functions. If you do not carry out the next
operation for more than 10 minutes, you will shut down, the screen will be black. Long
press the power icon for 3 seconds, only the power icon will be displayed, the
screen will be black and shutdown.
