-8-
USING YOUR APPLIANCE
Setting and using the oven programmer/timer
Selecting manual operation mode
After your appliance is connected to your mains supply for the first time, the numbers on the
timer display will flash. Before you can select a cooking function or set a temperature, you must
set the appliance into “manual operation” mode.
To select manual operation mode, press the “manual operation” button
(8) on the
control panel.
Setting the time of day
After setting your oven for manual operation, you should also set the time of day.
Use the “minus” button
(9)
and “plus” button
(10) to adjust the time that appears in
the display. After getting the display to the correct time, release the
“minus” and “plus”
buttons. After five seconds the time will fix in the display and you will be able to use your
oven.
The “manual operation” symbol
(18) will light on the oven programmer/timer display.
Before first use
To remove any residue from the oven that may have been left from the manufacturing process,
you should select either the fan or conventional oven function and turn the thermostat dial to
its maximum temperature setting. For the secondary oven you should select the conventional
oven function and select its maximum temperature setting.
It is perfectly normal for a smell to be produced during this process.
You should make sure that any windows in the room are left open during this process.
It is advisable for you not to remain in the room whilst the burning off process is taking
place.
You should leave each oven on maximum setting for 30
–
40 minutes.
IMPORTANT:
You should not burn off both ovens simultaneously.
