Salicru SPS.PC, User Manual, Page: 16 / 34

16
SALICRU
3. QUALITY ASSURANCE AND STANDARDS
3.1. MANAGEMENT STATEMENT
Our aim is to satisfy our customers. Management has estab-
lished a Quality and Environmental Policy for such purposes. As a
result, a Quality and Environmental Management System will be
implemented, which will ensure that we are compliant with the
requirements of the ISO 9001 and ISO 14001 standards and that
we meet all customer and stakeholder requirements.
The company management is also committed to the develop-
ment and improvement of the Quality and Environmental Man-
agement System, through:
•
Communication to the entire company of the importance of
satisfaction, both in terms of the customer’s requirements,
as well as legal and regulatory requirements.
•
Dissemination of the Quality and Environmental Policy and
setting of the Quality and Environment targets.
•
Management reviews.
•
Provision of the necessary resources.
3.2. STANDARDS
The SPS.PC product is designed, manufactured and marketed
in accordance with the EN ISO 9001 standard on Quality As-
surance and is certified by the SGS organisation. The mark
indicates conformity with the EEC Directives through applica-
tion of the following standards:
•
2014/35/EU on Low Voltage
•
2014/30/EU
on Electromagnetic Compatibility (EMC).
•
2011/65/EU on the Restriction of the use of certain haz-
ardous substances in electrical and electronic equipment
(RoHS).
According to the specifications of harmonised standards. Ref-
erence standards:
•
EN-IEC 62040-1 . Uninterruptible power systems (UPS).
Part 1-1: General and safety requirements for UPS
used in user access areas.
•
EN-IEC 60950-1
. Information technology equipment.
Safety. Part 1: General requirements.
•
EN-IEC 62040-2 . Uninterruptible power systems (UPS).
Part 2: Electromagnetic compatibility (EMC) requirements.
The manufacturer shall not be held responsible for any
damage caused by the user after altering or tampering
with the unit in any way.
WARNING!:
SPS.PC
. This is a C2 category UPS. In a residential en-
vironment, this product may cause radio interference, in
which case the user should take additional measures.
This unit is not suitable for use in life support applica-
tions, whereby a fault in the unit could prevent the life
support machine from working or could significantly
affect its safety or effectiveness. Likewise, it is not
recommended for medical applications, commercial
transport, nuclear installations, or other applications
or loads, whereby a fault in the product could lead to
personal injury or material damage.
The EC declaration of conformity for the product is
available for the customer and can be requested from
our head office.
This product is suitable for use in both single-user pro-
fessional and domestic applications.
3.3. ENVIRONMENT
This product has been designed with the protection of the en-
vironment in mind and has been manufactured in accordance
with the ISO 14001 standard.
Recycling the unit at the end of its useful life:
Our company commits to using the services of approved com-
panies that comply with the regulations in order to process the
recovered product at the end of its useful life (please contact
your distributor).
Packaging:
To recycle the packaging, follow the applicable legal regula-
tions, depending on the particular standards of the country
where the unit is installed.
Batteries:
The batteries represent a serious health and environmental
risk. They must be disposed of in accordance with the appli-
cable laws.