12
SALICRU
6. TROUBLESHOOTING GUIDE
Use the following table to resolve minor issues:
Problem
Possible cause
Solutions
No LED is lit on
the front panel.
Low battery.
Charge the UPS for at least 6
hours.
Battery fault.
Replace the battery with the
same model.
The UPS is not ON.
Press the UPS start-up button
again.
The alarm
sounds
continuously
when connected
to the mains.
The UPS is
overloaded.
First, disconnect a few loads.
Before starting it up again,
check that the connected load
matches the unit's power
specifications.
In the case of
a problem in
the mains, the
operating time
is very short.
The UPS is
overloaded.
Disconnect critical loads.
Battery voltage is
too low.
Charge the UPS for at least 6
hours.
Defective battery. It
may be due to the
ambient temperature
or inappropriate
operation.
Replace the battery with the
same model.
There are no
problems in the
mains but the
unit is in battery
mode.
The mains cable plug
is not connected
correctly.
Reconnect the mains cable
plug correctly.
Tabla 1.
Troubleshooting table.
•
If you are registered on the website:
support.salicru.com
, you can access:
support.salicru.com/troubleshooting
, to consult the extended troubleshooting guide of the unit,
in addition to accessing other services available for regis-
tered users.
