Salicru SPS.ADVANCE RT2, User Manual, Page: 29 / 31

28
SALICRU
9. ANNEXES.
9.1. GENERAL TECHNICAL SPECIFICATIONS.
Models. ADVANCE RT2.
Available power ratings (VA / W). 800 / 720 1,100 / 990 1,500 / 1,350 2,000 / 1,800 3,000 / 2,700
Technology. Line-interactive with sine-wave output.
Input.
Input type. Single-phase.
Number of cables. 3 cables - Phase R (L) + Neutral (N) and earth.
Rated voltage. 208 / 220 / 230 / 240 V AC
(1)
Input voltage range. 176.. 288 V AC
Input frequency range. 45.. 55 / 55.. 65 Hz ± 0.2 Hz; auto-detectable.
Permissible power factor loads. 0.9
Cold start (from batteries). Yes, by default with frequency of 50 Hz.
Inverter.
Technology. PWM
Waveform. Pure sine wave.
Power factor. 0.9
Rated voltage.
208 / 220 / 230 / 240 V AC
(1)
, selectable
Output voltage accuracy (battery mode). ± 1.5 %
Total harmonic distortion (THDv), with linear load. < 2 %
Frequency.
With mains present, synchronised to rated input (45.. 55 / 55.. 65 Hz).
With mains absent -backup mode- 50 / 60 ±0.1 Hz.
Transfer time, line mode to battery mode (normal
mode).
2..6 ms
Performance at full load, in normal mode with
battery 100% charged.
> 97 %
Performance at full load, in battery mode. > 89 % > 90 % > 91 % > 92 %
Overload in line mode
103.. 120 %: 5 min
> 120.. 150 %: 10 s
> 150 %: 1 s
Overload in battery mode.
103.. 120 %: 1 min
> 120.. 150 %: 10 s
> 150 %: 0.5 s
Crest factor. 3:1
Batteries (AGM sealed 3 - 5 years life).
Element voltage. 12 V DC
Capacity. 7 Ah 9 Ah 7 Ah 9 Ah
Number of batteries in device connected in series
/ group voltage.
2 / 24 V DC 4 / 48 V DC 6 / 72 V DC
Number of accumulators in battery module
connected in series x no. packs in parallel / group
voltage.
2 x 2 / 24 V DC 4 x 2 / 48 V DC 6 x 2 / 72 V DC
Low battery voltage. 22.4 V DC 44.8 V DC 67.2 V DC
Blocking voltage for group end of backup. 19.2 V DC 38.4 V DC 57.6 V DC
Internal battery charger.
Group floating voltage. 27.2 V DC 54.4 V DC 81.6 V DC
Maximum charge current. 1.5 A
Recharge time. 8 hours to 90% 4 hours to 90% 3 hours to 90% 4 hours to 90%
Optional internal battery charger (B1).
Maximum charge current. 8 A
Other functions.
Cold start. Yes
Emergency power off (EPO). Yes
IEC output sockets programmable at disconnection,
for non-critical loads.
Yes
General.
IEC input connectors. 10 A IEC 14 connector. 16 A IEC 20 connector.
IEC output connectors.
8 x 10 A IEC 13 (4 for critical loads + 4 for non-critical loads programmable at disconnection) +
1 x 16 A IEC 19 (only in 3 kVA model)
Communication ports. 2 (1 x RS232 -DB9- and 1 x USB, mutually exclusive).
Potential-free contacts. Yes, using optocouplers in the same connector as the RS232.
Connectors with protection for ADSL/fax/modem. RJ45 connectors, 1 input and 1 output.
YOUR CONNECTION TO SAFETY
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
Thiele KG
• V
orderer W
einberg 26 • D-71522 Backnang • T
el.: +49 (0)7191 3560-0
• Fax.: +49 (0)7191 3560-19
• info@thiele-kg.de
• www
.thiele-kg.de
YOUR CONNECTION TO SAFETY
klick to
www
u-s-v
YOUR CONNECTION TO SAFETY
klick to
www
ACDC-DCDC
YOUR CONNECTION TO SAFETY
klick to
www
SYSTEME
YOUR CONNECTION TO SAFETY
klick to
www
CONTACT
YOUR CONNECTION TO SAFETY
klick to
www
CALLBACK