45
Safety instructions
•
To prevent electric shock, do not use the device near running water. Do
not immerse the power cord in water or other liquids.
•
Before using the equipment for the first time, read the information and
safety instructions in this manual carefully and thoroughly.
•
Do not bend or pinch the power cord. To prevent any injury, do not al
low
the power cord to hang over the edge of the table or counter.
•
Make sure that the voltage indicated on the type plate corresponds to the
voltage on your network. The type plate can be found on the underside of
the motor block. The motor must always be switched off before
connecting the device to the mains supply. The speed switch (7)
-
Fig. 1
must be set to "0".
•
Do not use the device outdoors, it is only suitable for indoor use.
•
The device should not be placed in close proximity to open flames, easily
flammable materials (curtains, fabrics, etc.), radiators, ovens or other heat
sources.
•
Place the device on a horizontal and level surface before starting.
•
Place this device as close as possible to the power source so that you can
quickly and easily unplug it
.
•
The device must be operated with the type of power supply indicated on
the type plate. If you are unsure of the details of the available power
supply, ask your dealer or electrical professional.
•
Do not attempt to repair the equipment yourself, as opening
and
removing the covers will expose you to dangerous equipment components
or other hazards. Repairs should only be carried out by a qualified
workshop.
•
The equipment should be used and stored out of the reach of children. If
the device is used by or within the reach of children, careful adult
supervision is required.
•
Do not touch moving parts with your fingers during use.
•
Remember that when handing over the equipment to a third party, the
operating instructions must be included.
•
The manufacturer assumes no
liability for damage caused by improper use
or failure to follow the operating instructions or safety instructions.
