CAUTION:
Do not use gasoline
with an octane number less than
90 RON (87 AKI). This can cause
damage to the product.
Note:
Use gasoline with a higher octane
number if you frequently use the product at
continuously high engine speed.
3. Add the full quantity of the two-cycle engine
oil to the fuel container.
CAUTION:
Always use air-
cooled two-cycled engine oil of
high quality. Other oils can cause
damage to the product.
4. Shake the fuel mixture to mix the contents.
5. Add the remaining gasoline quantity to the
fuel container.
6. Shake the fuel mixture to mix the contents.
7. Fill the fuel tank of the product with the fuel
mixture. See
To use fuel on page 14
.
To fill the fuel tank
1. Make sure that the fuel mixture is correct
and that the fuel mixture is in a fuel
container with an antispill valve.
2. If fuel is on the container, remove the
unwanted fuel and let the container dry.
3. Make sure that the area near the fuel tank
cap is clean.
4. Remove the fuel tank cap.
5. Shake the fuel container before you add
the fuel mixture to the fuel tank.
6. Put back the fuel tank cap.
To lubricate the saw chain
The product has an automatic lubrication
system. The saw chain oil tank and the fuel
tank are designed so that the fuel runs out
before the saw chain oil. This safety feature
requires that the correct chain oil is used and
that the instructions are obeyed.
1. Use vegetable-based saw chain oil or a
standard chain oil.
2. Make sure that the area near the cap of the
saw chain oil tank is clean.
3. Remove the cap of the saw chain oil tank.
4. Fill the saw chain oil tank with the
recommended saw chain oil.
5. Put back the cap of the saw chain oil tank.
To start and stop
Before you start the engine
•
Examine the product for missing, damaged,
loose or worn parts.
•
Examine the nuts, screws and bolts.
•
Examine the air filter.
•
Examine the trigger lockout and the trigger
for correct operation.
•
Examine the stop switch for correct
operation.
•
Examine the product for fuel leaks.
•
Examine the saw chain sharpness and
tension.
To start a cold engine
1. Move the front hand guard forward to
engage the chain brake.
6
2
.
Open
the
switch
button(1 open /0 stop).
switch button
