22
| EN
RIS 1200-2200 V EKO 3.0 v2020.1
If the duct CO2 transmitter is used, it must be installed in the extract air duct. To install duct transmitters, hole drilling tools
are required .
8.1.4.
CO2 CONCENTRATION ACCORDING TO PETTENKOFER LIMIT
8.1.5.
CONNECTION OF SUPPLY AND EXTRACT AIR DAMPERS
3URGXFW5,69(.2FDQEHHTXLSSHGZLWKVXSSO\DLUDQGH[WUDFWDLUGDPSHUV'DPSHUVDUHFRQWUROOHGE\2SHQ&ORVHRU6SULQJUHWXUQDFWX
-
ators.
Wiring diagram for RIS VE EKO 3.0
M2, M3 – Open/Close damper actuators. Upon activation of outputs X16:17, X16:20 the dampers shall open, Upon activation of outputs X16:16,
X16:19 the dampers shall close.
Wiring diagram for RIS VW EKO 3.0
M2 – Spring-return damper actuator. M3 – Open/Close damper actuator. Upon activation of outputs X16:17, X16:20, the dampers open, Upon
DFWLYDWLRQRIRXWSXW;WKHH[WUDFWDLUGDPSHUFORVH7KHVXSSO\DLUGDPSHULVFRQWUROOHGE\VSULQJUHWXUQDFWXDWRUVRWKDWZKHQRXWSXW;
is deactivated, the supply air damper closes.