EN |
19
RIS 700 H EKO 3.0 v2020.1
8.1.2. EXTERNAL CO
2
/PRESSURE SENSORS
5,6+(.2XQLWVKDYHWZRFRQQHFWLRQVIRUH[WHUQDO&235(6685(LQSXW9'&VHQVRUV
Sensors connection:
7KHVHVHQVRUVDUHLQWHQGHGIRUWKHIROORZLQJIXQFWLRQVVXSSO\DLUSUHVVXUHH[WUDFWDLUSUHVVXUHDQGH[WUDFW&2GHWHFWLRQ
6XSSO\DLUSUHVVXUHLVPHDVXUHGLQVLGHWKHVXSSO\DLUGXFWUHIHUHQFHGWRWKHXQLW¶VVXUURXQGLQJDUHD
([WUDFWDLUSUHVVXUHLVPHDVXUHGLQVLGHWKHH[WUDFWDLUGXFWUHIHUHQFHGWRWKHXQLW¶VVXUURXQGLQJDUHD
The CO2 transmitter is installed in the extract air duct or room.
8.1.3. ROOM CO2 TRANSMITTER INSTALLATION RECOMMENDATION
min. 50 cm
min. 60 cm
150 cm
max. 400m
2
If the duct CO2 transmitter is used, it must be installed in the extract air duct. To install duct transmitters, hole drilling tools
are required .
8.1.4. CO2 CONCENTRATION ACCORDING TO PETTENKOFER LIMIT