Salda RIS 1900 VWL EKO 3.0, Quick Launch Manual

Page: 9 / 89

6 | EN SA-CONTROL v2019.1
11. CHANGING OF SUPPLY AIR TEMPERATURE
Go to the MENU → SET POINT to change the supply air temperature. Pic. 17 (page
67).
l1
. Window name.
l2 . Time.
l3 . Newly-set desired room temperature (the extracted air temperature).
B1
. Back. Return to the previous window.
B2 . Decrease the set temperature.
B3
. Increase the set temperature.
12. CHANGING THE FAN SPEED, BOOST (PRV)
Click on the fan speed button to change the fan speed, boost (PRV). Pic. 18
(page 67).
l1
. Displays the active fan speed mode.
B1 . Click to activate the “Stand-by” mode (if other settings allow this).
B2
. Click to turn on fan speed 1.
B3 . Click to turn on fan speed 2.
B4 . Click to turn on fan speed 3.
B5
. Click to turn on/off the “BOOST” function.
13. CHANGING OF MODE (MCB)
Click on the system mode button to change the mode (MCB). Pic. 19 (page 68):
l1
. Current operating mode.
B1 . STANDBY – AHU is stopped.
B2 . BUILDING PROTECTION – maintain minimal air movement. The temper-
ature can be maintained depending on the settings in the MENU → SET POINTS.
B3 . ECONOMY – use a decreased fan speed. The temperature can be main-
tained depending on the settings in the MENU → SET POINTS.
B4 . COMFORT – use normal fan speed. The temperature is maintained.
B5 . MAX BOOST – The fans operate at maximum power (for a specified period).
14. THE MAIN SAFETY INSTRUCTIONS
• Operate the equipment strictly within the provided temperature range.
• Prevent the possibility of moisture in the equipment.
• Keep the equipment away from direct sunlight.
• Protect the equipment from mechanical damage (hits, scratches, etc.).