18
| EN
RIRS 350 P EKO 3.0 v2021.1
8.1.3. ROOM CO
2
TRANSMITTER INSTALLATION RECOMMENDATION
min.
5
0 cm
min. 60 cm
15
0 cm
ma
x
. 400m
2
If the duct CO
2
transmitter is used, it must be installed in the extract air duct. To install duct transmitters, hole drilling tools
are required .
8.1.4. CO2 CONCENTRATION ACCORDING TO PETTENKOFER LIMIT
8.1.5. CONNECTION OF SUPPLY AND EXTRACT AIR DAMPERS
3URGXFW5,563(.2FDQEHHTXLSSHGZLWKVXSSO\DLUDQGH[WUDFWDLUGDPSHUV'DPSHUVDUHFRQWUROOHGE\2SHQ&ORVHRU6SULQJUHWXUQDF
-
tuators.
Wiring diagram for RIRS PE EKO 3.0
M2, M3 – Open/Close damper actuators. Upon activation of outputs X16:17, X16:20 the dampers shall open, Upon activation of outputs X16:16,
X16:19 the dampers shall close.