P a g e
|
23
20-62 VHF & UHF TRANSMITTER
Product Manual
Sea Air and Land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
March 2020
Salcom UDP/TCP Test Tool
Salcom provides a simple tool for testing TCP/IP and UDP Ethernet connections. This can be
downloaded from the Salcom website under the 20-62 product page.
This tool may be used to:
Establish and test connections,
Send serial commands,
Initiate paging messages.
Testing a connection
If the 20-62 is configured as a server, the test tool should be a client.
Enter both IP address and port numbers
Click “Connect”
Enter data to send in the bottom line and click “SEND”
Any returned data will appear in the Data Received box.
The serial command “SN?” will return the serial number and product information, and can
be used as a handy test command.
“CA1234560 1 Hello” can be used to initiate a paging message in Salcom protocol.
