P a g e
|
12
11-85-0000 VHF & UHF POCKET PAGING TRANSMITTER
Product Manual
Sea Air and land Communications Ltd, 10 Vanadium Place, Addington, Christchurch 8024, New Zealand
January 2018
Programming
The 11-85SE can be programmed using the 11-85SESE (not Multi PSD) support software available
free of charge from the “Support” section of our web site (
www.salcom.com). The PSD software
allows the user to configure input actions, POCSAG and transmission settings, pre-defined
messages, and RF frequency.
Preparation Requirements
To change the programmable options connect the 11-85SE via a SALCOM 12-47 serial
programming adaptor from the programming plug P8 to the serial port of a computer running
Salcom 11-85SESE PSD.
Should you have the 12-48 USB programming adaptor which supersedes the 12-47, this inserts
into the programming plug P8 and connects to any USB port on the computer via a mini USB
device cable.
Preparations for using the Programming Software
1.
Remove the 4 case screws and the rear cover of the case.
2.
Insert the four-pin socket of the Salcom 12-47 programming header into the 11-85SE plug
P8. (see photo).
3.
Connect the Salcom 11-46 DB25 plug to the PC com port.
Connecting the 12-47 Programmer
Connecting the 12-48 Programmer