Salamander 3 Bay Low Profile Wall Mount Cabinet 10 of 10
503-246 [3.17]
ADJUSTMENT TIPS
3U Vertical Rack
Remove
Loosen screws on both sides.
Then tilt rack until the hook is
free and lift up until the rack is
free from bottom screw.
Re-Install
Slide the slotted ends of the
rack over the bottom screw and
hook the top screw as shown.
Tighten with provided
Hex Key.
A
B
DOORS
NOTE: It is important that cabinet is level before adjusting doors, see step 2.
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS AND MOUNTS
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your
Salamander product, let us know. We are here to make it right. 1.860.761.9500
Full warranty including limitations and warranty claim information may be found at
www.salamanderdesigns.com/commercial/warranty
Made in USA
Main Adjustment (Side to Side and Up/Down)
Adjustment is made by turning screw (A) in and out.
Dismount Hinge from Hinge Plate
With one hand holding the door open, pull
back on the hinge quick-release lever (B).
Door Front
Adjust the tops of the doors to be
parallel to the top of the cabinet.
A
A
A
A
B
