Salamander 3 Bay AV Credenza with Single Display Mount
503-234 [5.17] page 5 of 17
Optional
1. INSTALL display BRACKETS
Attach Brackets to Display
Fasten the brackets using fasteners (length and size recommended
by the display manufacturer).
Using improper screw length can
damage the display.
C
NOTE:
An assortment of screws and
optional spacers have been
provided in the PL100 Kit.
Optional Spacers are provided for
additional clearance between
the mount and the Display
if necessary.
M8 16mm screws are
supplied for use with
Microsoft Surface Hub.
2. ADJUSTING MOUNT
Determine Vertical Position of Mount
Measure from the bottom of display
to center of display mount bracket.
A
Determine Horizontal Position
of Mount
Measure the length of the display
and divide by 2 to get the horizontal
mount center.
NOTE:
If a space between the two displays
is required, add half of the width of the
space to this dimension.
B
X
A
B
