Strut 170 Wall Stand Designed for Microsoft Surface 2S 50”
501-760-MS v1.23 page 7 of
8
7.
Attach to Strut 170 to Wall
Drill 1/2” diameter hole. Hold metal
channel flat alongside plastic straps
and slide channel through hole.
Hold ends of straps between thumb
and forefinger and pull toward you
until channel rests flush behind wall.
Slide plastic cap along straps with either
hand with flange of cap is flush with wall.
Snap straps at wall by pushing side
to side,snapping of straps level with
flange of cap.
Move Strut 170 to wall and attach
bracket. Insert bolt through Bracket
and tighten until snug against wall.
A
B
C
D
Install wall fasteners
to marked locations
and fasten.
NOTE: Alternate fasteners
provided for wood studs.
